pour l'avoir il faut donc acheter un DX150
Ibasso dx200
Paul : " here are no plans to sell the AMP6 by itself "
pour l'avoir il faut donc acheter un DX150
pour l'avoir il faut donc acheter un DX150
C est comme les Pokemon. Il faut tous les avoir
En mode promenade : Oriolus Trailli, FIr Audio Xenon 6, Craft Ears Aurum, 64 Audio Duo , Lotoo paw S1 , Cayin ru6, fibae 2 et Warbler prelude
Je suis devenu tellement nomade. Et c'est tellement mieux.
Je suis devenu tellement nomade. Et c'est tellement mieux.
Je crois avoir vu des photos de prototype sur leur page Facebook.
en mode toute saison M11 Pro+Oriolus Custom
-
Julien-Lille
- J'ai des câbles en or massif
- Messages : 2277
- Inscription : 17 nov. 2015 10:27
- Contact :
Paul parle de 1,2w sous 32 Ohms et une dispo d'ici deux semaines. A voir ce que ça donne.
en mode toute saison M11 Pro+Oriolus Custom
-
flipper203
- TN m'a tuer
- Messages : 5691
- Inscription : 31 mars 2011 13:10
- Localisation : Issy les moulineaux
- Contact :
Tu le trouve comment le 4s iranon ?
DAP/DAC:Hiby RS6, Hifi Go Blu, HM601, Orb lightning
Intras:Mentawai, EM10
Casques: MDR-1000X
Autres: EA Code 51, Cema Tianwaitian , PwAudio n°5
Sedentaire: Streamer Halo audio Red / Dac Chord Hugo TT2/ Preamp YBA 1 delta et blocs mono YBA 1 delta / Enceintes DIY
Intras:Mentawai, EM10
Casques: MDR-1000X
Autres: EA Code 51, Cema Tianwaitian , PwAudio n°5
Sedentaire: Streamer Halo audio Red / Dac Chord Hugo TT2/ Preamp YBA 1 delta et blocs mono YBA 1 delta / Enceintes DIY
-
Kooka
Il va bientôt y avoir autant d'amplis pour le DX200 que de Pokémon..... Attrapez les tous !!kyo9999 a écrit :AMP7 et 8 sur le feu! :-?
-
kyo9999
- Il est frais mon topic !
- Messages : 10173
- Inscription : 01 avr. 2014 23:29
- Localisation : Marseille
- Contact :
C'est clair!!!!kookaburra a écrit :Il va bientôt y avoir autant d'amplis pour le DX200 que de Pokémon..... Attrapez les tous !!kyo9999 a écrit :AMP7 et 8 sur le feu! :-?
Pour le nouveau firmware, les updates:
1. Folder Play function has been added. It can be found under Settings/Play mode.(Android OS)
2. Improvement to the UI response.(Android OS)
3. Rectified the bug that AAC and WMA can't be played via Bluetooth.(Android OS)
Après install: Interface semble vraiment plus fluide, mais pas encore perçu de changement au niveau audio.
1. Folder Play function has been added. It can be found under Settings/Play mode.(Android OS)
2. Improvement to the UI response.(Android OS)
3. Rectified the bug that AAC and WMA can't be played via Bluetooth.(Android OS)
Après install: Interface semble vraiment plus fluide, mais pas encore perçu de changement au niveau audio.
Je le place entre le 1 et le 3. Un poil moins "chaud" que le 3. Il me convient, mais HamsteRER ne partage pas mon avis et préfère garder son baril d'amp6flipper203 a écrit :Tu le trouve comment le 4s iranon ?
Et toi ?
en mode toute saison M11 Pro+Oriolus Custom
N'oublie pas le Dx150kookaburra a écrit :Il va bientôt y avoir autant d'amplis pour le DX200 que de Pokémon..... Attrapez les tous !!kyo9999 a écrit :AMP7 et 8 sur le feu! :-?
en mode toute saison M11 Pro+Oriolus Custom
L'amp 6 a la meilleure scène sonore à mes oreilles.iranon a écrit :Je le place entre le 1 et le 3. Un poil moins "chaud" que le 3. Il me convient, mais HamsteRER ne partage pas mon avis et préfère garder son baril d'amp6 :DD
-
kyo9999
- Il est frais mon topic !
- Messages : 10173
- Inscription : 01 avr. 2014 23:29
- Localisation : Marseille
- Contact :
AMP8 Fully discrete balanced amp for the DX200 and DX150.
Release: July 2, 2018 Price: 199 USD.
Specifications:
Output Voltage：6.2Vrms
Frequency Response：15Hz-45KHz +/- 0.3dB
S/N：125dB
THD+N： 0.00023%，-113dB （no load@2.5Vrms）
0.00023%，-113dB （300Ω@2.5Vrms）
Output Impedance: 0.38ohm
DNR：125dB
Crosstalk：-120dB
Average Play Time: 7hours. Play time varies with different sample/bit rates, volume and headphone/IEM loads.
Features: +/-8V high voltage swing. This significantly improves dynamics and headroom, resulting in a more accurate sound that is true to the recording.
AMP8 is a complete new discrete circuit design that is dedicated to the DX150/DX200 and features both a high voltage and current output. High current output is very useful for low impedance multi drivers in-ear monitors.
Low VCE transistors are utilized and are manually sorted and paired, providing better consistency and linearity. The low VCE also expands the linearity range.
The transistors used on the buffer stage have a 2700mAh output current rating, which allows the AMP8 to drive IEMs and headphones that require high current with ease.
A Pentaconn 4.4mm balanced output port is used. The large double contact area of this socket contact lowers resistance and allows better current transmission.
*When using OPAMPs to develop an amplifier, it is almost impossible to achieve high voltage output and high current output, especially, on a portable devices. Some engineers have used the TPA6120 on the buffer stage to achieve 750mA output current. However, it has 10ohm output impedance, which isn’t ideal for low impedance IEMs or headphones. So, we decided to use discrete components which are usually used on desktop amplifiers to develop the AMP8 but the development process is much more difficult when using discrete components. After a long development period and with our final design, we present the AMP8 card that has both high voltage and high current output and at the same time maintains low output impedance with extremely good measurements. AMP8 complements the premium performance of the DX150 and the DX200, giving you even more choices when playing the music you enjoy.
Release: July 2, 2018 Price: 199 USD.
Specifications:
Output Voltage：6.2Vrms
Frequency Response：15Hz-45KHz +/- 0.3dB
S/N：125dB
THD+N： 0.00023%，-113dB （no load@2.5Vrms）
0.00023%，-113dB （300Ω@2.5Vrms）
Output Impedance: 0.38ohm
DNR：125dB
Crosstalk：-120dB
Average Play Time: 7hours. Play time varies with different sample/bit rates, volume and headphone/IEM loads.
Features: +/-8V high voltage swing. This significantly improves dynamics and headroom, resulting in a more accurate sound that is true to the recording.
AMP8 is a complete new discrete circuit design that is dedicated to the DX150/DX200 and features both a high voltage and current output. High current output is very useful for low impedance multi drivers in-ear monitors.
Low VCE transistors are utilized and are manually sorted and paired, providing better consistency and linearity. The low VCE also expands the linearity range.
The transistors used on the buffer stage have a 2700mAh output current rating, which allows the AMP8 to drive IEMs and headphones that require high current with ease.
A Pentaconn 4.4mm balanced output port is used. The large double contact area of this socket contact lowers resistance and allows better current transmission.
*When using OPAMPs to develop an amplifier, it is almost impossible to achieve high voltage output and high current output, especially, on a portable devices. Some engineers have used the TPA6120 on the buffer stage to achieve 750mA output current. However, it has 10ohm output impedance, which isn’t ideal for low impedance IEMs or headphones. So, we decided to use discrete components which are usually used on desktop amplifiers to develop the AMP8 but the development process is much more difficult when using discrete components. After a long development period and with our final design, we present the AMP8 card that has both high voltage and high current output and at the same time maintains low output impedance with extremely good measurements. AMP8 complements the premium performance of the DX150 and the DX200, giving you even more choices when playing the music you enjoy.
J'hésite à revendre le mojo pour le prendre. Je vais attendre les premiers retours à avant
en mode toute saison M11 Pro+Oriolus Custom