Foobar (Sous Win7) avec carte son (Chipset Reatek ACL269)

[kamal91]

Bonjour,
J'aurais besoin de votre aide pour configurer mon Foobar2000 (que je viens d'installer) car je n'ai rien compris entre les Wasapi, Aiso et DirectSound...
Voici les spécificités de ma carte son :

98dB Signal-to-Noise Ratio (A-weighting) for DAC output
98dB Signal-to-Noise Ration (A-weighting) for ADC input
Meets WLP (Windows Logo Program) 3.10 and future WLP requirements that become effective from 01 June 2008
2+2-channel DAC supports 16/20/24-bit PCM format for independent two stereo channel audio playback
4-channel ADC supports 16/20/24-bit PCM format for independent two stereo channel audio inputs
All DACs supports 44.1/48/96/192kHz sample rate
All ADCs support 44.1/48/96kHz sample rate
SPDIF-OUT support 16/20/24-bit format and 32/44.1/48/88.2/96/192kHz rate
Supports MONO line level output
Supports external PCBEEP input and built-in digital BEEP generator
Software selectable 2.5V/3.2V/4.2V VREFOUT as bias voltage for analog microphone input
Two jack detection pins each designed to detect up to 4 jacks
1dB resolution of input and output volume control
Programmable +10/+20/+30dB boost gain for analog microphone input
Built-in headphone amplifiers for port-A and port-C.
2 GPIOs are supported for customized applications (pin shared with digital microphone interface)
EAPD (External Amplifier Power Down) is supported (pin shared with secondary SPDIF-OUT)
Supports Anti-pop mode when analog power AVDD is on and digital power is off
Power support: 3.3V digital core power; 1.5V~3.3V digital IO power for HDA link; 3.3V~5.0V analog power; 3.3V~5.0V power stage voltage
Enhanced power management features
Secondary SPDIF-OUT supports 16/20/24-bit format and 32k/44.1k/48k/88.2k/96k/192kHz rate
Supports stereo digital microphone input
Programmable boost gain and volume control for digital microphone input
Headphone amplifier for port-A does not require DC blocking capacitors
Stereo Bridge-Tied Load Class-D amplifier at port-D has 2Watt (rms)/4O per channel output
Short circuit and thermal overload protection for Class D amplifier
Supports digital PWM output at port-D which system integrator can easily connect the output to external power amplifier receives digital audio stream
Five band hardware equalizer designed for BTL output (port-D) to compensate for frequency response while driving the mini-speaker
Intel low power ECR compliant: supports power status control, jack detection, and wake-up event in D3 mode
48-pin QFN ‘Green’ package

Software Features :
Compatible with Windows Logo Program 3.10 and future requirements that become effective from 01 June 2008
WaveRT-based audio function driver for Windows Vista
EAX™ 1.0 & 2.0 compatible
Direct Sound 3D™ compatible
A3D™ compatible
I3DL2 compatible
HRTF 3D Positional Audio (Windows XP only)
Emulation of 26 sound environments to enhance gaming experience
Multi-band software equalizer and tools
Voice Cancellation and Key Shifting in Karaoke mode
Dynamic range control (expander, compressor, and limiter) with adjustable parameters
Intuitive Configuration Panel (Realtek Audio Manager) to enhance user experience
Provides 10-foot GUI for Windows Media Center
Microphone Acoustic Echo Cancellation (AEC), Noise Suppression (NS), and Beam Forming (BF) technology for voice application
Smart multiple streaming operation
HDMI audio driver for AMD platform
Dolby® PCEE program™ (optional software feature)
SRS® TrueSurround HD (optional software feature)
Fortemedia® SAM™ technology for voice processing (Beam Forming and Acoustic Echo Cancellation) (optional software feature)

Merci d'avance pour votre aide.

[manu2020K]

Il parait que certains sont atteints de phobie administrative.

A la lecture de ton post, j'ai peur d'être atteint de phobie audiophile.

[Zyg]

les Wasapi, Aiso sont faits pour court-circuiter les drivers realtec entre ton pc et ton dac;


https://sites.google.com/site/musiqaudi ... ser-foobar


http://www.hdfever.fr/2013/06/17/hd-fev ... rage-asio/

[Gwaaan]

Si tu branches des enceintes de bureau ou un casque directement à ton PC, te prends pas la tête, tu prends direct sound.

[kamal91]

Bonsoir,

Alors c'est sûr ce n'est pas une installation très audiophile (même pas audiophile du tout), mais c'était juste histoire de voir si je pouvais avoir un meilleur son quand je branche mon Sennheiser HD25 pour faire mes compiles audio.

Alors je vous remercie pour vos réponses.

Bonne année 2015 à tous.