http://schiit.com/products/fulla
Encore du AKM AK4396 pour la partie DAC, comme sur le Schiit Modi ou le Audioengine D3. Et du côté de l'ampli on retrouve un AD8397 déjà vu dans pas mal de DAC/AMP aussi (Pico, Fiio E11k, Hifiman HM-901, Headstage Arrow, ...).Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-200KHz, -3dB
Maximum Power:
16 ohms: 400mW RMS per channel
32 ohms: 300mW RMS per channel
50 ohms: 220mW RMS per channel
300 ohms: 40mW RMS per channel
THD: <0.004%, 20Hz-20KHz, at 1V RMS
IMD: <0.005%, CCIR
SNR: >101db, A-weighted, referenced to 1V RMS
Crosstalk: >-67dB, 20 Hz-20KHz
Output Impedance: Less than 0.4 ohms
Gain: 1.5 (3.5db)
USB Receiver: C-Media CM6631A
Bit Depth and Sample Rates Supported: 16/44.1 to 24/96, including 24/88.2
DAC: AKM AK4396 with Analog Devices ADA4610-based filter stage
Output stage: Analog Devices AD8397 high-current rail-to-rail amplifier
Headphone Output Size: 1/8", unlike all of our other amps
Power Supply: Via USB, with +/- 5V rails via high-current negative rail generator with inductor filtering and local regulation
Power Consumption: 0.8W typical
Size: 2.5 x 1.2 x 0.45”
Weight: 3 oz
Ca fait envie, c'est à essayer je pense !