[MOD] - Firmwares pour ZX300, WM1A et WM1Z

Avatar de l’utilisateur
SEPVY
100db + 100db = 200db
100db + 100db = 200db
Messages : 692
Inscription : 17 juil. 2020 12:33
Localisation : Nanterre
Contact :

Message par SEPVY »

jprenaud78 a écrit : 25 sept. 2021 13:53
edit: it works :headphone: :bravo: :bravo: :bravo: :bravo:
Super ! (Y)(Y)
Donc avec 4 signatures, 16 régions, 2 modes, 2 initialisations du DAC, ça fait environ 256 combinaisons à tester ! ;-/
Ultra-nomade : Final ZE8000, JVC HA-FW1000T, Final ZE3000, Final EVATW01, Sony WI-1000X
Nomade : ZX300, A35, A15, Ipod touch
Semi-nomade : WM1A, Sony PHA-1AEU, Oppo HA-2
Intras : Sony IER-Z1R, Sony XBA-N3BP, Sony IER-M7, Earsonics Purple, Final A5000, Final Heaven IV
Casques fermés : Sony MDR-1AM2, Pioneer SE-MHR5
Casques ouverts : Grado GW100 Beautiful Audio by Silvian, Sennheiser HD-570
DAC ultra-nomades : AK HC2, earStudio ES100, AT-PHA55BT
Source sédentaire : Auralic Aries Mini
madmike1978
Mélomaniac
Mélomaniac
Messages : 898
Inscription : 28 mai 2012 16:19

Message par madmike1978 »

jprenaud78 a écrit :You are the best thanks
I will have a look later
Best regards JP

edit: it works :headphone: :bravo: :bravo: :bravo: :bravo:
J'ai pourtant l'impression qu'on disaient la même chose, pensant surtout que tu avais lu les instructions.
Avatar de l’utilisateur
jprenaud78
== Anim / Modo ==
Messages : 7766
Inscription : 24 déc. 2016 10:33
Contact :

Message par jprenaud78 »

Les mystères parfois tu fais la même chose ça marche pas. Tu réessaye à tête reposée et là ça marche lol
DAP: AK 120ii + Lotoo Paw Gold, Cayin N6ii A01/E02/T01 + Sony WM1A mode Bright + Sony A15
DAC/AMP: Pionner U 05 S + Earmen Tr-amp + Auglamour Gr1 + Audioquest Cobalt
IEM: Oriolus Forsteni (PW N°5)+ Oriolus mk2 (Forza) + Onkyo E900M + AK T8IE mk2 (alo reference) + JAWS Tuned (Nicehck BlueComet) + Sony XBA n3 (Kimber) + Noble K10U (Ares II 8wirer)
CASQUE: Grado Sr2e Gpads + Hifiman He400i + Beyerdynamic T1 3rd (Forza Claire)
Par le passé: Cowon Plenue R, Fiio X7mk2, Sony A35, sony zx300, DX160, Dx220 (4s, 9, 1mk2, 8ex), Shanling M1, Meze Noir, LCD-1, Focal Elear.
Avatar de l’utilisateur
MrWalkman
Le mono y'a que ca de vrai !
Le mono y'a que ca de vrai !
Messages : 48
Inscription : 01 oct. 2020 12:22

Message par MrWalkman »

Something came up and we're now at www.nwmods.ml.
www.nwmods.ml

Question Everything
H@R
Suis-je (une) enceinte ?
Suis-je (une) enceinte ?
Messages : 178
Inscription : 10 déc. 2020 22:50
Localisation : Lyon

Message par H@R »

Bonjour à la communauté
Je compte installer le nouveau FW One. Mais avant, je dois désinstaller celui du lecteur.
Avez vous une facon simple de voir sur le Sony le modèle / version de FW installé ? C'est un de ceux à double signature (swith hold à changer au boot)
J'irais ensuite télécharger le "bon" revert.
Merci
DAP Sony nw-wm1a mod NPAudio 3.0 SE & FW 3.2 FEv2 + Earsonic Grace HR / Oriolus Percivali / Fostex TH000 Ebony by Drop / ATH ES10
Avatar de l’utilisateur
SEPVY
100db + 100db = 200db
100db + 100db = 200db
Messages : 692
Inscription : 17 juil. 2020 12:33
Localisation : Nanterre
Contact :

Message par SEPVY »

Hello,

Tu trouves cette information dans les paramètres (informations sur l'unité).

Image

Sur la page du WM1A/Z du site de MrWalkman, tu as un dossier qui reprend tous les stockrevert de tous les FW précédents.
https://www.nwmods.ml/p/sony-wm1a-wm1z- ... mware.html
Ultra-nomade : Final ZE8000, JVC HA-FW1000T, Final ZE3000, Final EVATW01, Sony WI-1000X
Nomade : ZX300, A35, A15, Ipod touch
Semi-nomade : WM1A, Sony PHA-1AEU, Oppo HA-2
Intras : Sony IER-Z1R, Sony XBA-N3BP, Sony IER-M7, Earsonics Purple, Final A5000, Final Heaven IV
Casques fermés : Sony MDR-1AM2, Pioneer SE-MHR5
Casques ouverts : Grado GW100 Beautiful Audio by Silvian, Sennheiser HD-570
DAC ultra-nomades : AK HC2, earStudio ES100, AT-PHA55BT
Source sédentaire : Auralic Aries Mini
Avatar de l’utilisateur
MrWalkman
Le mono y'a que ca de vrai !
Le mono y'a que ca de vrai !
Messages : 48
Inscription : 01 oct. 2020 12:22

Message par MrWalkman »

Walkman One, integrating 4 sound signatures in one package (without needing to use StockRevert), is now available for ZX300 as well :)

It includes previous sound signatures, like Midnight or Dawn (as "Warm" and "Bright"), as well as "Neutral" (a combination between Midnight/Dawn) and the "WM1Z" stock sound.

For each one of these sound signatures you can choose between the Normal mode, the Plus v1 mode, or the Plus v2 mode.

Make sure to read info that is available in the downloaded firmware archive, as well as on the website, in the FAQ section.

https://www.nwmods.ml/p/walkman-one-zx300series.html
www.nwmods.ml

Question Everything
H@R
Suis-je (une) enceinte ?
Suis-je (une) enceinte ?
Messages : 178
Inscription : 10 déc. 2020 22:50
Localisation : Lyon

Message par H@R »

SEPVY a écrit : 30 sept. 2021 11:03 Hello,
Tu trouves cette information dans les paramètres (informations sur l'unité).
[...]
Sur la page du WM1A/Z du site de MrWalkman, tu as un dossier qui reprend tous les stockrevert de tous les FW précédents.
https://www.nwmods.ml/p/sony-wm1a-wm1z- ... mware.html
Super (Y)(Y) Merci
DAP Sony nw-wm1a mod NPAudio 3.0 SE & FW 3.2 FEv2 + Earsonic Grace HR / Oriolus Percivali / Fostex TH000 Ebony by Drop / ATH ES10
Avatar de l’utilisateur
magicguy
Mon chien s'appelle LossLess
Mon chien s'appelle LossLess
Messages : 3480
Inscription : 05 févr. 2012 03:10

Message par magicguy »

MrWalkman a écrit : 01 oct. 2021 23:41 Walkman One, integrating 4 sound signatures in one package (without needing to use StockRevert), is now available for ZX300 as well :)

It includes previous sound signatures, like Midnight or Dawn (as "Warm" and "Bright"), as well as "Neutral" (a combination between Midnight/Dawn) and the "WM1Z" stock sound.

For each one of these sound signatures you can choose between the Normal mode, the Plus v1 mode, or the Plus v2 mode.

Make sure to read info that is available in the downloaded firmware archive, as well as on the website, in the FAQ section.

https://www.nwmods.ml/p/walkman-one-zx300series.html
I read the FAQ about normal mode, plus v1 mode and plus v2 mode.
I was on FEV2+ on my wm1A before installing the new one.
I had the choice between normal and plus mode (normal should be Midnight, and plus should be Dawn ?).

The sound the most similar should be Dawn I
Guess, when I booted with lock on.
About the plus mode, was it Plus V1 or V2 ?

Thx
[*]
Inventaire :
Cables -> Rhapsodio Évolution Copper / Rhapsodio Evolution Silver / Clone 1950 / PW Audio 1950 / Effect Audio Onyx / Effect Audio Code 51 / YY Pro Tucana
DAP/AMP -> Hiby R8 + SP1000-Amp / WM1A FE+ mod / AK120+Glove A1 / AK120 TITAN / MS-AK100 / Hisound Studio V Anniversary / Sansa Fuze
Intras -> Fourté Noir + Erlkonig + Ambient Acoustics Lam Am7 + AK T8ie mk2
Casques -> Sennheizer Amperior / T51p modifié
---
Partis :
DAPs -> RWAK240+, LPG Diana, Aune M1S, Sony ZX2, DX50
Intras -> K10u acrylique / K10 custom / iSine20 calble Cipher V1 et V2
Câbles -> PW Audio 1960K 4 brins / PW Audio 1960 2 brins / Effect Audio Horus 4 brins / Silver Dragon / Han Sound 8 brins 2 pins 2.5mm / AAW Capri USB-C IEM 2pin (DAC/AMP)
Casques -> Audeze Sine Cipher + 3.5 Lavricable / Denon AHD600 / T51p / Sennheizer HD25
Streamer -> Poly + Mojo

---
A vendre :
A venir…
Avatar de l’utilisateur
MrWalkman
Le mono y'a que ca de vrai !
Le mono y'a que ca de vrai !
Messages : 48
Inscription : 01 oct. 2020 12:22

Message par MrWalkman »

magicguy a écrit : 02 oct. 2021 22:29
MrWalkman a écrit : 01 oct. 2021 23:41 Walkman One, integrating 4 sound signatures in one package (without needing to use StockRevert), is now available for ZX300 as well :)

It includes previous sound signatures, like Midnight or Dawn (as "Warm" and "Bright"), as well as "Neutral" (a combination between Midnight/Dawn) and the "WM1Z" stock sound.

For each one of these sound signatures you can choose between the Normal mode, the Plus v1 mode, or the Plus v2 mode.

Make sure to read info that is available in the downloaded firmware archive, as well as on the website, in the FAQ section.

https://www.nwmods.ml/p/walkman-one-zx300series.html
I read the FAQ about normal mode, plus v1 mode and plus v2 mode.
I was on FEV2+ on my wm1A before installing the new one.
I had the choice between normal and plus mode (normal should be Midnight, and plus should be Dawn ?).

The sound the most similar should be Dawn I
Guess, when I booted with lock on.
About the plus mode, was it Plus V1 or V2 ?

Thx
Please also read info about the settings file and how to change the sound signature.

There are 4 sound signatures: Neutral, Warm, Bright, and WM1Z.

Warm is Midnight, and Bright is Dawn.

Each one of these 4 sound signatures have their own Normal and Plus modes.

You can choose between Plus v1 mode and Plus v2 mode in the settings file.

So if you'd want it to sound like Dawn, you'd need to have the Bright sound signature.
www.nwmods.ml

Question Everything
Avatar de l’utilisateur
Guigui
100db + 100db = 200db
100db + 100db = 200db
Messages : 591
Inscription : 19 févr. 2017 20:59
Contact :

Message par Guigui »

Excellent ce firmware Walkman One. En effet cela demande un peu plus de concentration quand on veut choisir la signature voulue, les instructions sont très claires cela dit.
Merci pour ce travail formidable Mr Walkman et surtout pour la patience de répéter d'innombrables fois que toutes les infos nécessaires à l'utilisation du firmware sont inscrites un peu partout en fait...

Je pense que beaucoup de personnes pensent que le fait de débrancher le stockage USB correspond au redémarrage du lecteur car il crée à ce moment là la bibliothéque, mais ce n'est pas le cas !!

Il faut bien éteindre et rallumer le lecteur comme précisé.

Pour ma part sur le ZX300 je teste Neutral, MX3, DAC différent, plus v2, gain normal. Mon casque Denon mm400 répond très bien à ce réglage avec un son très vivant/musical, un scène sonore très vaste. Et ça ne manque pas de détail, le travail de mixage sur certains titres est parfois surprenant, je remarque le placement de certains son de façon bien plus localisé que ce que j'avais pu remarquer par le passé.
Pourtant je n'était pas particulièrement fan de cette association casque /DAP par auparavant.

J'ai utilisé project Z, fev2 et midnight v2, chacun avait des caractéristiques intéressantes. Je crois que la batterie tiens mieux sur walkman one que project z. J'ai aussi l'impression que la création de la bibliothèque est plus rapide
DAP: AK A&norma SR 25 MK II, Shanling M0, Samsung R0
Dongle : DD Hifi TC 44 C
Casques : AKG k-845 BT, Beyerdynamic custom one pro, Hifiman Ananda stealth magnet :(l) , Philips Fidelio X2HR, Sony wh1000 XM2
Intras : TRI I3, SONY Wf1000XM3
Ampli-Dac: SMSL M200, Fiio Olympus 2 E-10k.
Lecteur réseau : Wiim Pro
Avatar de l’utilisateur
MrWalkman
Le mono y'a que ca de vrai !
Le mono y'a que ca de vrai !
Messages : 48
Inscription : 01 oct. 2020 12:22

Message par MrWalkman »

Project Z/Midnight is Warm, and FEv2 is Bright :)
www.nwmods.ml

Question Everything
H@R
Suis-je (une) enceinte ?
Suis-je (une) enceinte ?
Messages : 178
Inscription : 10 déc. 2020 22:50
Localisation : Lyon

Message par H@R »

Just updated !
Y a plus qu'a passer aux tests et à l'écoute.
Avez-vous une région préférée et pourquoi ?
DAP Sony nw-wm1a mod NPAudio 3.0 SE & FW 3.2 FEv2 + Earsonic Grace HR / Oriolus Percivali / Fostex TH000 Ebony by Drop / ATH ES10
Avatar de l’utilisateur
MrWalkman
Le mono y'a que ca de vrai !
Le mono y'a que ca de vrai !
Messages : 48
Inscription : 01 oct. 2020 12:22

Message par MrWalkman »

I like MX3 because it sounds more lively.
www.nwmods.ml

Question Everything
H@R
Suis-je (une) enceinte ?
Suis-je (une) enceinte ?
Messages : 178
Inscription : 10 déc. 2020 22:50
Localisation : Lyon

Message par H@R »

by the way, would you have any idea why i can not connect to the remote control ? It tries to connect and then "connexion not possible"... Matter of region code ?
i have to investigate further with google
DAP Sony nw-wm1a mod NPAudio 3.0 SE & FW 3.2 FEv2 + Earsonic Grace HR / Oriolus Percivali / Fostex TH000 Ebony by Drop / ATH ES10
Répondre

Revenir à « Sony »